Discussion:
Error934: PPP Link Protocol Terminated
(too old to reply)
KiwiAngle
2009-08-16 08:16:23 UTC
Permalink
Hi,

I am trying to use my O2 Xda Atom as a USB Modem. However, I keep on
getting this message stating, "Error 934: PPP Link Protocol was
Terminated". Could anyone please help me to resolve this?

I am not sure if inserting my modem log helps. Anyway, they are as
follows:-

08-16-2009 18:05:59.248 - File: C:\Windows\system32\tapisrv.dll,
Version 6.0.6001
08-16-2009 18:05:59.248 - File: C:\Windows\system32\unimdm.tsp,
Version 6.0.6001
08-16-2009 18:05:59.248 - File: C:\Windows\system32\unimdmat.dll,
Version 6.0.6000
08-16-2009 18:05:59.248 - File: C:\Windows\system32\uniplat.dll,
Version 6.0.6000
08-16-2009 18:05:59.248 - File: C:\Windows\system32\drivers\modem.sys,
Version 6.0.6001
08-16-2009 18:05:59.248 - File: C:\Windows\system32\modemui.dll,
Version 6.0.6001
08-16-2009 18:05:59.248 - File: C:\Windows\system32\mdminst.dll,
Version 6.0.6001
08-16-2009 18:05:59.248 - Modem type: O2 USB Modem Link
08-16-2009 18:05:59.248 - Modem inf path: oem52.inf
08-16-2009 18:05:59.248 - Modem inf section: Sphone.Install
08-16-2009 18:05:59.248 - Matching hardware ID: usb\vid_0408&pid_0079
08-16-2009 18:05:59.279 - 230400,8,N,1, ctsfl=0, rtsctl=1
08-16-2009 18:05:59.310 - Initializing modem.
08-16-2009 18:05:59.310 - CD is high while initializing modem.
08-16-2009 18:05:59.326 - Send: AT&FE0&D2&C1V1S0=0<cr>
08-16-2009 18:05:59.326 - Recv: <cr><lf>OK<cr><lf>
08-16-2009 18:05:59.326 - Interpreted response: OK
08-16-2009 18:05:59.341 - Send: ATL3M1X4<cr>
08-16-2009 18:05:59.341 - Recv: <cr><lf>OK<cr><lf>
08-16-2009 18:05:59.341 - Interpreted response: OK
08-16-2009 18:05:59.341 - Sending user initialization commands.
08-16-2009 18:05:59.357 - Send: AT+CGDCONT=1,"IP","DODOLNF1","",
0,0<cr>
08-16-2009 18:05:59.778 - Recv: <cr><lf>OK<cr><lf>
08-16-2009 18:05:59.778 - Interpreted response: OK
08-16-2009 18:05:59.778 - Waiting for a call.
08-16-2009 18:05:59.794 - Send: ATS0=0<cr>
08-16-2009 18:05:59.794 - Recv: <cr><lf>OK<cr><lf>
08-16-2009 18:05:59.794 - Interpreted response: OK
08-16-2009 18:05:59.794 - 230400,8,N,1, ctsfl=1, rtsctl=2
08-16-2009 18:05:59.825 - Initializing modem.
08-16-2009 18:05:59.825 - CD is high while initializing modem.
08-16-2009 18:05:59.841 - Send: AT&FE0&D2&C1V1S0=0<cr>
08-16-2009 18:05:59.841 - Recv: <cr><lf>OK<cr><lf>
08-16-2009 18:05:59.841 - Interpreted response: OK
08-16-2009 18:05:59.856 - Send: ATL3M1X4<cr>
08-16-2009 18:05:59.856 - Recv: <cr><lf>OK<cr><lf>
08-16-2009 18:05:59.856 - Interpreted response: OK
08-16-2009 18:05:59.856 - Sending user initialization commands.
08-16-2009 18:05:59.872 - Send: AT+CGDCONT=1,"IP","DODOLNF1","",
0,0<cr>
08-16-2009 18:06:00.277 - Recv: <cr><lf>OK<cr><lf>
08-16-2009 18:06:00.277 - Interpreted response: OK
08-16-2009 18:06:00.277 - Dialing.
08-16-2009 18:06:00.293 - Send: ATDT*###<cr>
08-16-2009 18:06:01.447 - Recv: <cr><lf>CONNECT<cr><lf>
08-16-2009 18:06:01.447 - Interpreted response: Connect
08-16-2009 18:06:01.463 - Connection established at 230400bps.
08-16-2009 18:06:01.463 - Error-control off or unknown.
08-16-2009 18:06:01.463 - Data compression off or unknown.
08-16-2009 18:06:02.789 - Hanging up the modem.
08-16-2009 18:06:02.789 - Hardware hangup by lowering DTR.
08-16-2009 18:06:12.804 - A timeout has expired waiting to comm event
to occour.
08-16-2009 18:06:12.804 - WARNING: After lowering DTR to hangup, the
modem did not drop CD with in 10 seconds, Attempting software hangup.
08-16-2009 18:06:12.804 - Send: +++
08-16-2009 18:06:22.819 - A timeout has expired waiting to comm event
to occour.
08-16-2009 18:06:22.819 - Recv: <cr><lf>OK<cr><lf>
08-16-2009 18:06:22.819 - Interpreted response: OK
08-16-2009 18:06:22.835 - Send: ATH<cr>
08-16-2009 18:06:27.843 - Timed out waiting for response from modem
08-16-2009 18:06:27.858 - Send: ATH<cr>
08-16-2009 18:06:27.858 - Recv: <cr><lf>OK<cr><lf>
08-16-2009 18:06:27.858 - Interpreted response: OK
08-16-2009 18:06:27.858 - 230400,8,N,1, ctsfl=0, rtsctl=1
08-16-2009 18:06:27.889 - Initializing modem.
08-16-2009 18:06:27.889 - CD is high while initializing modem.
08-16-2009 18:06:27.905 - Send: AT&FE0&D2&C1V1S0=0<cr>
08-16-2009 18:06:27.905 - Recv: <cr><lf>OK<cr><lf>
08-16-2009 18:06:27.905 - Interpreted response: OK
08-16-2009 18:06:27.921 - Send: ATL3M1X4<cr>
08-16-2009 18:06:27.921 - Recv: <cr><lf>OK<cr><lf>
08-16-2009 18:06:27.921 - Interpreted response: OK
08-16-2009 18:06:27.921 - Sending user initialization commands.
08-16-2009 18:06:27.936 - Send: AT+CGDCONT=1,"IP","DODOLNF1","",
0,0<cr>
08-16-2009 18:06:28.373 - Recv: <cr><lf>OK<cr><lf>
08-16-2009 18:06:28.373 - Interpreted response: OK
08-16-2009 18:06:28.373 - Waiting for a call.
08-16-2009 18:06:28.389 - Send: ATS0=0<cr>
08-16-2009 18:06:28.389 - Recv: <cr><lf>OK<cr><lf>
08-16-2009 18:06:28.389 - Interpreted response: OK
08-16-2009 18:06:28.389 - Session Statistics:
08-16-2009 18:06:28.389 - Reads : 0 bytes
08-16-2009 18:06:28.389 - Writes: 0 bytes
ATQ0V1E0 - OK
AT+GMM - PocketPC
AT+FCLASS=? - (0)
AT#CLS=? - COMMAND NOT SUPPORTED
AT+GCI? - COMMAND NOT SUPPORTED
AT+GCI=? - COMMAND NOT SUPPORTED
ATI1 - Microsoft Corporation AT Command Interpreter Settings...
E0 L0 M0 Q0 V1 X4 &C1 &D2
S00=000 S01=000 S02=043 S03=013 S04=010
S05=008 S06=002 S07=060 S08=002 S10=014
S12=050
ATI2 - Microsoft Corporation AT Command Interpreter Settings...
E0 L0 M0 Q0 V1 X4 &C1 &D2
S00=000 S01=000 S02=043 S03=013 S04=010
S05=008 S06=002 S07=060 S08=002 S10=014
S12=050
ATI3 - Microsoft Corporation AT Command Interpreter Settings...
E0 L0 M0 Q0 V1 X4 &C1 &D2
S00=000 S01=000 S02=043 S03=013 S04=010
S05=008 S06=002 S07=060 S08=002 S10=014
S12=050
ATI4 - Microsoft Corporation AT Command Interpreter Settings...
E0 L0 M0 Q0 V1 X4 &C1 &D2
S00=000 S01=000 S02=043 S03=013 S04=010
S05=008 S06=002 S07=060 S08=002 S10=014
S12=050
ATI5 - Microsoft Corporation AT Command Interpreter Settings...
E0 L0 M0 Q0 V1 X4 &C1 &D2
S00=000 S01=000 S02=043 S03=013 S04=010
S05=008 S06=002 S07=060 S08=002 S10=014
S12=050
ATI6 - Microsoft Corporation AT Command Interpreter Settings...
E0 L0 M0 Q0 V1 X4 &C1 &D2
S00=000 S01=000 S02=043 S03=013 S04=010
S05=008 S06=002 S07=060 S08=002 S10=014
S12=050
ATI7 - Microsoft Corporation AT Command Interpreter Settings...
E0 L0 M0 Q0 V1 X4 &C1 &D2
S00=000 S01=000 S02=043 S03=013 S04=010
S05=008 S06=002 S07=060 S08=002 S10=014
S12=050

Thanks in advance!
Moe Trin
2009-08-16 16:41:28 UTC
Permalink
On Sun, 16 Aug 2009, in the Usenet newsgroup comp.protocols.ppp, in article
<02e350d5-6ebd-48fd-947c-***@b14g2000yqd.googlegroups.com>, KiwiAngle
wrote:

NOTE: Posting from groups.google.com (or some web-forums) dramatically
reduces the chance of your post being seen. Find a real news server.
Post by KiwiAngle
I am trying to use my O2 Xda Atom as a USB Modem. However, I keep on
getting this message stating, "Error 934: PPP Link Protocol was
Terminated". Could anyone please help me to resolve this?
I'm not a windoze user, but this appears to be a hardware compatibility
issue. Windoze isn't doing a good job talking to the modem.
Post by KiwiAngle
I am not sure if inserting my modem log helps. Anyway, they are as
follows:-
That's a baffle 'em with bullshit type of file - filled with (for the
most part) techno-babble.
Post by KiwiAngle
08-16-2009 18:05:59.310 - Initializing modem.
08-16-2009 18:05:59.310 - CD is high while initializing modem.
The driver isn't mimicking a RS-232 serial port properly.
Post by KiwiAngle
08-16-2009 18:05:59.326 - Send: AT&FE0&D2&C1V1S0=0<cr>
08-16-2009 18:05:59.326 - Recv: <cr><lf>OK<cr><lf>
It appears to be talking to something - that's the good news
Post by KiwiAngle
08-16-2009 18:06:00.277 - Dialing.
08-16-2009 18:06:00.293 - Send: ATDT*###<cr>
08-16-2009 18:06:01.447 - Recv: <cr><lf>CONNECT<cr><lf>
That's one hell of a fast 'dial, answer, negotiate' stage.
Post by KiwiAngle
08-16-2009 18:06:01.463 - Connection established at 230400bps.
08-16-2009 18:06:01.463 - Error-control off or unknown.
08-16-2009 18:06:01.463 - Data compression off or unknown.
08-16-2009 18:06:02.789 - Hanging up the modem.
followed by a very quick 'throw the phone back on the hook'. I see
no indication that it actually heard anything from the other end of
the phone line.
Post by KiwiAngle
08-16-2009 18:06:02.789 - Hardware hangup by lowering DTR.
08-16-2009 18:06:12.804 - A timeout has expired waiting to comm event
to occour.
08-16-2009 18:06:12.804 - WARNING: After lowering DTR to hangup, the
modem did not drop CD with in 10 seconds, Attempting software hangup.
08-16-2009 18:06:12.804 - Send: +++
08-16-2009 18:06:22.819 - A timeout has expired waiting to comm event
to occour.
08-16-2009 18:06:22.819 - Recv: <cr><lf>OK<cr><lf>
08-16-2009 18:06:22.819 - Interpreted response: OK
08-16-2009 18:06:22.835 - Send: ATH<cr>
08-16-2009 18:06:27.843 - Timed out waiting for response from modem
08-16-2009 18:06:27.858 - Send: ATH<cr>
08-16-2009 18:06:27.858 - Recv: <cr><lf>OK<cr><lf>
Your communications program is having extreme difficulty in controlling
the modem. This REALLY looks like you've got the wrong driver. This
has nothing to do with the ppp protocol.

There is a 'comp.dcom.modems' news group that might be more appropriate,
but the group is pretty quiet. You may want to take the modem/computer
back to the store where you've bought it - perhaps someone there can
configure it suitably.

Old guy

Loading...